How To Change A Metal Watch Band With End Pieces

This cursory guide will evidence you how to remove you bracelet and fit a conventional direct ended sentry strap.

You will require
Bound Bar tool

1.4mm or i.6mm Screwdriver

A cloth to lay your watch on

We would propose keeping all of the parts that you lot remove from your watch in a very safe identify.

Removing the Bracelet will be a lot easier if you open upward the Bracelet. To exercise this, you can either remove a bound bar that will exist property your clasp together or detach a link from the bracelet. Using your spring bar tool to shrink the spring bar will release it from the clasp and it should come away from the clasp.

One time yous have opened upwardly the bracelet, you lot volition exist able to admission the Spring Bars belongings the bracelet on a lot easier which reduces the adventure of damage to the watch.

At this point, nosotros would recommend taping up the lugs of the watch. This volition further protect the watch from potentially scratching the scout when you are removing the bracelet.

To remove the bracelet, locate the forked end of your Spring Bar tool on the Leap Bar within the bracelet. One time located, compress the Spring Bar inwards and you lot should be able to remove it from the pigsty that it is located in. Do the same to the other side of the Spring Bar and you lot should be able to remove the bracelet from between the lugs.

In one case yous have removed the Bracelet you should be left with just the watch. You lot will be see the two holes on the inside of the lugs. This is where you need to endeavour and get the new Jump Bars on the leather strap in to.

We would suggest replacing the tape. Insert your new bound bars in to the strap and locate one stop of the spring bar in to one of the holes on the lugs making sure the strap is the correct manner up. Also, yous will want to adhere the length of the strap with the holes on the the vi o'clock lugs and the buckle length on the 12 o'clock lugs.

In one case the 1 cease of the Jump Bar is in the lug then y'all take the other end of the spring bar and shrink it with the forked finish of the spring bar tool. You will so exist able to locate the hole and yous will hear a little click when the leap bar has been located in to the hole. At this point we would propose lightly tugging on the strap to double check that the jump confined have been located in to the holes safely.